Fluorescent Finn Fun: Spiral Plying

A person holds up thick, multicolored yarn strands in front of their face in a home office with shelves and papers. The yarn features pink, orange, yellow, green, gray, and purple tones. The person wears glasses and a smartwatch.

This month’s project is a colorful one, a handspun spiral ply yarn using hand-dyed Finn wool top that I dyed in fluorescent colors.

A woman with glasses and dark hair smiles while holding and displaying a thick, braided strand of colorful Finn wool roving in orange, yellow, and blue. She is sitting on a gray couch with blue pillows in a modern, bright living room.

Finnish Landrace AKA Finn Fibers for Beginner Spinners

Finnish Landrace – or simply Finn for short – was one of the first fleeces I scoured from raw. In fact, this was my first time spinning Finn as top, and it didn’t disappoint as a fiber that was enjoyable to spin. For beginners, short fibers like Merino can be difficult to spin. Finn has a longer staple, so I find it just glides through the spinning wheel.

Here’s what I know about Finn wool fiber – or rather, my experience with it. This fiber is a silky, sleek wool, but it has enough crimp to stay together while spinning.

I’ve enjoyed processing Finn from raw in the past, since it doesn’t have as much lanolin as, say, Merino.

Finn is considered a lightweight fleece with a staple length of 3 to 6 in or 7 and 1/2 to 15 cm. I find I can spin this fiber really quickly because I can just glide my hands along without much finessing, although it’s always important to have control of your spinning fiber. So, I tend to spin very hybrid-like. If I’m feeling like the the fiber is getting a little thin, then I’m going to stop, do a little front pick or front draw to even that out, and then keep going.

Finn for Felting

One thing to keep in mind, this fiber felts quite easily. In fact, the reason I bought it in the beginning was for doing felting projects when my kids were little. So, just be careful you don’t agitate it too much when you dye it. Mind you, I don’t recall felting being a problem in my early fleece scouring and dyeing days, but I know that is a characteristic of this wool, so I thought I should mention it.

Dyeing Finn Fiber

If you want to get started dyeing, Finn takes dye really easily. I hardly used any dye to get these colors. It sucks in the dye so wonderfully. It puffs up so nicely once dry, with just the right amount of crimp.

With raw scoured fleece I have dyed Finn both before and after combing. There are pros and cons to both, but usually you would want to dye your hand processed fiber after it is combed to get out debris or smaller unspinable bits. That said, if you have a relatively clean fleece you may just want to dye it after scouring and experiment with blending after.

I’ve only ever seen Finn sold as pure white. The color of Finn has been described as a white with a warm cast to it and personally, I think that’s a fair description as it really enhances dye colors. As I’ve mentioned, it also absorbs dye really well which is a plus.

A spinning wheel with bobbin partially filled with green and pink yarn sits on a wooden floor. Bright yellow and green roving is draped and braided on the side. The spinning wheel is black and is atop a tripod stand.

How To Spiral Ply

I hand-dyed this Finn roving with Jacquard’s Neon colors (you can see how I section dye roving in a crockpot here).

I thought the colors were so striking that it would be a good example of spiral plying. To spiral ply yarn, you simply need two singles spun in the same direction to ply together; only one must be thicker than the other. This creates the yarn’s spiral appearance: the thinner singles wrap around the thicker singles, creating a corkscrew effect.

A person with glasses and dark hair smiles, holding two large spools of brightly colored yarn in front of them. They are sitting on a light-colored couch in a living room with wooden floors, a spinning wheel, and various crafting supplies visible in the background.

If you’ve never done a spiral ply intentionally, I guarantee you have done one unintentionally, even if just part of your singles has a wider section. So, the whole premise of a spiral ply yarn is that you have a thicker singles wrapping around a thinner singles. And it makes this really nice sort of corkscrewy kind of pattern.

Tips for Spiral Plying

If you do nothing else, you can just ply as normal and it that larger singles is going to wrap around the smaller singles. But, if you’re like me and you would like to exaggerate that spiral, the best thing to do is to hold the singles that’s thinner really taut while the thicker one is held loosely in the other hand.

The other thing with the setup, which I think helps, is that I have my thicker ply on my right side, my thinner ply on the left side. You may find it might work better the opposite depending on whether you’re left or right-handed. I’m left-handed but very right hand dominant, so this is the way that I like my setup.

The thing to keep in mind as well is that the yarn that’s going to be the most showcased is the thicker one, where the thinner one has a supporting role in holding the spiral.

See The Process of Finn Fiber to Spiral Ply Yarn (Below)

The Colors Used for the Fluorescent Finn Roving

In the bonus video we’ll take a look at some more samples, as well as the fluorescent colors used in the previous video as well as some dupes.

The colors used:

Twelve white cards with handwritten labels display yarn samples in red, orange, pink, blue, aqua, and yellow shades. Each card has yarn tied through it, showing different fluorescent and cool-toned colors, arranged on a wooden surface.

Colors used:
Jacquard Acid dyes
Black light blue 1/4 tsp
fluorescent red 1/4 tsp
fluorescent orange 1/4 tsp
fluorescent yellow 1/4 tsp
chartreuse 1/4 tsp
hot fuchsia 1/4 tsp
brilliant kelly green 1/4 tsp
-also-
Fluorescent yellow, Country Classics 1/3 tsp
Bright Yellow G&S Dyes 1/4tsp

Watch the Bonus Video Here:

Have you ever spun Finn wool and/or spiral plied? I hope you are inspired to give both a try… 🙂

leilani signature